support browserautoms

VERSION

@@ -0,0 +1 @@
+1.5

bin/apps.json

@@ -15,7 +15,8 @@
     {
         "Name": "Google Chrome",
         "Id": "Google.Chrome",
-        "Version": "",
+        "Version": "152.0.7977.83",
+        "Manifest": "../manifests/Google.Chrome.yaml",
         "Enabled": 1,
         "PostInstall": [
             {
@@ -52,7 +53,13 @@
         "Id": "Microsoft.Teams",
         "Version": "",
         "Enabled": 1,
-        "PostInstall": []
+        "PostInstall": [
+            {
+                "Type": "FileCopy",
+                "Source": "./assets/msteams/Microsoft Teams.lnk",
+                "Destination": "$HOME\\Desktop\\Microsoft Teams.lnk"
+            }
+        ]
     },
     {
         "Name": "KeePassXC",
@@ -69,6 +76,10 @@
                 "Type": "FileCopy",
                 "Source": "./assets/keepassxc/KeePassXC.lnk",
                 "Destination": "$HOME\\Desktop\\KeePassXC.lnk"
+            },
+            {
+                "Type": "RegImport",
+                "Path": "./config/keepassxc.reg"
             }
         ]
     },
@@ -119,6 +130,19 @@
             }
         ]
     },
+    {
+        "Name": "Revo Uninstaller",
+        "Id": "RevoUninstaller.RevoUninstaller",
+        "Version": "2.6.8",
+        "Manifest": "../manifests/RevoUninstaller.RevoUninstaller.yaml",
+        "Enabled": 0,
+        "PostInstall": [
+            {
+                "Type": "RegImport",
+                "Path": "./config/revo_uninstaller.reg"
+            }
+        ]
+    },
     {
         "Name": "Adobe Acrobat Reader",
         "Id": "Adobe.Acrobat.Reader.64-bit",
@@ -131,6 +155,18 @@
             }
         ]
     },
+    {
+        "Name": "Browserautoms",
+        "Id": "Special.Browserautoms",
+        "Version": "3.3.1",
+        "Enabled": 0,
+        "PostInstall": [
+            {
+                "Type": "Command",
+                "Command": "\"$PSScriptRoot\\config\\browserautoms.bat\""
+            }
+        ]
+    },
     {
         "Name": "System Optimize",
         "Id": "System.Config",

bin/main.ps1

@@ -1,15 +1,15 @@
-# 设置严格模式，遇到错误停止，防止错误的命令雪崩
+# Stop on errors to avoid cascading failures.
 $ErrorActionPreference = "Stop"
 #Set-StrictMode -Version Latest
 
-# === 1. 加载依赖库 ===
-# 确保 lib 目录存在
+# === 1. Check dependencies ===
+# Make sure the lib directory exists.
 if (-not (Test-Path "$PSScriptRoot\..\lib")) {
     Write-Error "Cannot find .\lib, some files missing."
     exit 1
 }
 
-# === 2. 读取配置 ===
+# === 2. Read configuration ===
 $jsonPath = "$PSScriptRoot\apps.json"
 if (-not (Test-Path $jsonPath)) {
     Write-Error "Cannot find: $jsonPath"
@@ -17,14 +17,100 @@ if (-not (Test-Path $jsonPath)) {
 }
 
 Write-Host "Reading configurations..." -ForegroundColor Cyan
-# 使用 UTF8 读取防止中文乱码
+# Read as UTF-8.
 $apps = Get-Content $jsonPath -Encoding UTF8 | ConvertFrom-Json
+$forcePostInstall = $false
 
-# === 3. 主循环 ===
+function Unblock-WinGetCache {
+    param(
+        [Parameter(Mandatory=$true)] [string]$PackageId
+    )
+
+    $wingetCacheRoot = Join-Path $env:TEMP "WinGet"
+    if (-not (Test-Path $wingetCacheRoot)) {
+        return
+    }
+
+    $cacheItems = Get-ChildItem -Path $wingetCacheRoot -Recurse -File -ErrorAction SilentlyContinue |
+        Where-Object { $_.FullName -like "*\$PackageId.*" }
+
+    foreach ($item in $cacheItems) {
+        try {
+            Unblock-File -LiteralPath $item.FullName -ErrorAction Stop
+            Write-Host "-> Unblocked cached installer: $($item.FullName)" -ForegroundColor DarkGray
+        } catch {
+            Write-Warning "Failed to unblock cached installer: $($item.FullName), $_"
+        }
+    }
+}
+
+# === 2.1 Load selection.ini overrides ===
+# selection.ini is located in the project root, one level above bin.
+$selectionPath = Join-Path (Split-Path $PSScriptRoot -Parent) "selection.ini"
+
+if (Test-Path $selectionPath) {
+    Write-Host "Loading selection overrides from selection.ini..." -ForegroundColor Cyan
+    try {
+        # Store app switches and global options separately.
+        $selectionConfig = @{}
+        $optionsConfig = @{}
+        $currentSection = ""
+
+        foreach ($line in (Get-Content $selectionPath -Encoding UTF8)) {
+            $line = $line.Trim()
+            if ([string]::IsNullOrWhiteSpace($line) -or $line.StartsWith(";") -or $line.StartsWith("#")) {
+                continue
+            }
+
+            if ($line -match '^\[(.+)\]$') {
+                $currentSection = $matches[1].Trim()
+                continue
+            }
+
+            if ($line -notmatch "=") {
+                continue
+            }
+
+            # Split on the first equals sign only.
+            $parts = $line -split '=', 2
+            if ($parts.Count -eq 2) {
+                $key = $parts[0].Trim()
+                $value = $parts[1].Trim()
+
+                if ($currentSection -eq "Options") {
+                    $optionsConfig[$key] = $value
+                } else {
+                    $selectionConfig[$key] = $value
+                }
+            }
+        }
+
+        if ($optionsConfig.ContainsKey("ForcePostInstall")) {
+            $forcePostInstall = $optionsConfig["ForcePostInstall"] -eq "1"
+        }
+
+        # Apply app enabled overrides.
+        foreach ($app in $apps) {
+            if ($selectionConfig.ContainsKey($app.Name)) {
+                # Convert to integer 1 or 0.
+                $app.Enabled = [int]$selectionConfig[$app.Name]
+            }
+        }
+    } catch {
+        Write-Warning "Error reading selection.ini: $_"
+    }
+}
+
+# === 2.2 Enable local manifest installation ===
+# winget install --manifest requires LocalManifestFiles. Re-running this is harmless.
+Write-Host "Enabling winget local manifest support..." -ForegroundColor Cyan
+winget settings --enable LocalManifestFiles
+
+# === 3. Main loop ===
 foreach ($app in $apps) {
     if ($app.Enabled -ne 1) {
         Write-Host "[Skipping] $($app.Name)" -ForegroundColor DarkGray
-        continue # 立即结束本次循环，进入下一个软件
+        continue # Skip this app.
     }
 
     Write-Host "`n==========================================" -ForegroundColor Cyan
@@ -32,56 +118,117 @@ foreach ($app in $apps) {
     Write-Host "=========================================="
 
     if ($app.Id -eq "System.Config") {
-        # 如果是纯配置项，直接打印跳过信息
+        # This is a configuration-only item.
         Write-Host "[System Config] Skipping install..." -ForegroundColor Magenta
+    } elseif ($app.Id -eq "Special.Browserautoms") {
+        Write-Host "[Special] Install Browserautoms..." -ForegroundColor Magenta
     } else {
-        # --- 步骤 A: Winget 安装 ---
-        $wingetArgs = @(
-            "install",
-            "--id", $app.Id,
-            "-e",
-            "--silent",
-            "--accept-package-agreements",
-            "--accept-source-agreements",
-            "--disable-interactivity"
-            # "--scope", "machine"
-        )
+        # --- Step A: Winget install ---
+        $manifestPath = $null
+        $manifestTempDir = $null
 
-        # [版本检查逻辑]
-        # 检查 Version 是否存在且不为空字符串
-        if (-not [string]::IsNullOrWhiteSpace($app.Version)) {
-            Write-Host "-> Version: $($app.Version)"
-            $wingetArgs += "-v"
-            $wingetArgs += $app.Version
+        if (-not [string]::IsNullOrWhiteSpace($app.Manifest)) {
+            Write-Host "-> Manifest: $($app.Manifest)"
+
+            if ($app.Manifest -match '^https?://') {
+                $manifestTempDir = Join-Path $env:TEMP ("winit-helper-manifest-" + [guid]::NewGuid().ToString("N"))
+                New-Item -ItemType Directory -Path $manifestTempDir -Force | Out-Null
+
+                $manifestFileName = [System.IO.Path]::GetFileName(([uri]$app.Manifest).AbsolutePath)
+                if ([string]::IsNullOrWhiteSpace($manifestFileName)) {
+                    $manifestFileName = "$($app.Id).yaml"
+                }
+
+                $manifestPath = Join-Path $manifestTempDir $manifestFileName
+                Write-Host "-> Downloading custom manifest..."
+                Invoke-WebRequest -Uri $app.Manifest -OutFile $manifestPath
+            } else {
+                $manifestPath = $app.Manifest
+                if (-not [System.IO.Path]::IsPathRooted($manifestPath)) {
+                    $manifestPath = Join-Path $PSScriptRoot $manifestPath
+                }
+
+                if (-not (Test-Path $manifestPath)) {
+                    Write-Error "Cannot find manifest: $manifestPath"
+                    continue
+                }
+            }
+
+            $wingetArgs = @(
+                "install",
+                "--manifest", $manifestPath,
+                "--silent",
+                "--accept-package-agreements",
+                "--accept-source-agreements",
+                "--disable-interactivity"
+                # "--scope", "machine"
+            )
         } else {
-            Write-Host "-> Version: latest"
+            $wingetArgs = @(
+                "install",
+                "--id", $app.Id,
+                "-e",
+                "--silent",
+                "--accept-package-agreements",
+                "--accept-source-agreements",
+                "--disable-interactivity"
+                # "--scope", "machine"
+            )
+
+            # Add Version only when configured.
+            if (-not [string]::IsNullOrWhiteSpace($app.Version)) {
+                Write-Host "-> Version: $($app.Version)"
+                $wingetArgs += "-v"
+                $wingetArgs += $app.Version
+            } else {
+                Write-Host "-> Version: latest"
+            }
         }
 
         Write-Host "-> Installing via winget..."
         
-        # 执行安装
-        $proc = Start-Process -FilePath "winget" -ArgumentList $wingetArgs -Wait -PassThru -NoNewWindow
+        # Run install command.
+        try {
+            & winget @wingetArgs
+            $exitCode = $LASTEXITCODE
 
-        # 检查安装结果 (0=成功, -1978335189=已安装)
-        if ($proc.ExitCode -eq 0) {
+            if ($exitCode -eq -1978335231 -and -not [string]::IsNullOrWhiteSpace($app.Manifest)) {
+                Write-Warning "winget failed after download. Unblocking cached installer and retrying once..."
+                Unblock-WinGetCache -PackageId $app.Id
+
+                & winget @wingetArgs
+                $exitCode = $LASTEXITCODE
+            }
+        } finally {
+            if ($manifestTempDir -and (Test-Path $manifestTempDir)) {
+                Remove-Item -LiteralPath $manifestTempDir -Recurse -Force
+            }
+        }
+
+        # Check install result (0=success, -1978335189=already installed).
+        if ($exitCode -eq 0) {
             Write-Host "[Success]" -ForegroundColor Green
-        } elseif ($proc.ExitCode -eq -1978335189) {
-            Write-Host "[Skip] Already installed" -ForegroundColor Yellow
-            continue # 已经安装的为了避免覆盖配置，也就不配置了
+        } elseif ($exitCode -eq -1978335189) {
+            if ($forcePostInstall) {
+                Write-Host "[Skip] Already installed, running PostInstall..." -ForegroundColor Yellow
+            } else {
+                Write-Host "[Skip] Already installed" -ForegroundColor Yellow
+                continue # Skip PostInstall when already installed.
+            }
         } else {
-            Write-Error "[Fail] Error code: $($proc.ExitCode)"
-            continue # 安装失败则跳过后续配置
+            Write-Error "[Fail] Error code: $exitCode"
+            continue # Skip PostInstall on install failure.
         }
     }
 
-    # --- 步骤 B: PostInstall 配置 ---
+    # --- Step B: PostInstall configuration ---
     if ($app.PostInstall -and $app.PostInstall.Count -gt 0) {
         Write-Host "`n-> Configuring..." -ForegroundColor Cyan
 
         $stepIndex = 0
         foreach ($action in $app.PostInstall) {
             
-            # [间隔逻辑] 如果这不是第一步，先等待 2 秒
+            # Wait between PostInstall steps.
             if ($stepIndex -gt 0) {
                 Write-Host "(Waiting 2 seconds...)" -ForegroundColor DarkGray
                 Start-Sleep -Seconds 2
@@ -90,20 +237,20 @@ foreach ($app in $apps) {
             try {
                 switch ($action.Type) {
                     
-                    # 1. 复制文件
+                    # 1. Copy file.
                     "FileCopy" {
                         & "$PSScriptRoot\..\lib\invoke-filecopy.ps1" `
                             -Source $action.Source `
                             -Destination $action.Destination
                     }
 
-                    # 2. 导入注册表
+                    # 2. Import registry file.
                     "RegImport" {
                         & "$PSScriptRoot\..\lib\invoke-regimport.ps1" `
                             -Path $action.Path
                     }
 
-                    # 3. 执行 CMD
+                    # 3. Run command.
                     "Command" {
                         & "$PSScriptRoot\..\lib\invoke-cmdexec.ps1" `
                             -Command $action.Command `

config/browserautoms.bat

@@ -0,0 +1,3 @@
+@echo off
+
+msiexec.exe /i "https://dl.oranjee.org/winget-repo/manifests/i/Internal/Browserautoms/3.3.1/browserautoms.msi" /qn /norestart

config/chrome.reg

@@ -4,6 +4,14 @@ Windows Registry Editor Version 5.00
 [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Google\Chrome\ExtensionSettings\ddkjiahejlhfcafbddmgiahcphecmpfh]
 "installation_mode"="normal_installed"
 "update_url"="https://clients2.google.com/service/update2/crx"
+;TrafficLight
+[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Google\Chrome\ExtensionSettings\cfnpidifppmenkapgihekkeednfoenal]
+"installation_mode"="normal_installed"
+"update_url"="https://clients2.google.com/service/update2/crx"
+;Easy Clean
+[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Google\Chrome\ExtensionSettings\bjpclojdgakmcjmfdgiodjgfncaejaki]
+"installation_mode"="normal_installed"
+"update_url"="https://clients2.google.com/service/update2/crx"
 
 [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Google\Chrome\Recommended]
 "AutofillAddressEnabled"=dword:00000000
@@ -21,6 +29,10 @@ Windows Registry Editor Version 5.00
 [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Edge\ExtensionSettings\odfafepnkmbhccpbejgmiehpchacaeak]
 "installation_mode"="normal_installed"
 "update_url"="https://edge.microsoft.com/extensionwebstorebase/v1/crx"
+;Click&Clean
+[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Edge\ExtensionSettings\dacknjoogbepndbemlmljdobinliojbk]
+"installation_mode"="normal_installed"
+"update_url"="https://edge.microsoft.com/extensionwebstorebase/v1/crx"
 
 [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Edge\Recommended]
 "AlternateErrorPagesEnabled"=dword:00000000

config/keepassxc.reg

@@ -0,0 +1,5 @@
+Windows Registry Editor Version 5.00
+
+; disable automatically start
+[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run]
+"KeePassXC"=-

config/revo_uninstaller.reg

@@ -0,0 +1,72 @@
+Windows Registry Editor Version 5.00
+
+[HKEY_CURRENT_USER\Software\VS Revo Group\Revo Uninstaller\General]
+"AU on startup"=dword:00000000
+
+[HKEY_CURRENT_USER\Software\VS Revo Group\Revo Uninstaller\Uninstaller]
+"Create System Restore Pont"=dword:00000000
+"Maximize uninstall wizard"=dword:00000000
+"Select leftovers by default"=dword:00000001
+
+[HKEY_CURRENT_USER\Software\VS Revo Group\Revo Uninstaller\TrackCleaner\Browsers\CHR]
+"Clear History of Visited Internet Web Pages"=dword:00000001
+"Delete Temporary Internet Files"=dword:00000001
+"Delete Cookies"=dword:00000000
+"Delete Download History"=dword:00000001
+"Delete Form History"=dword:00000001
+"Delete Session History"=dword:00000001
+
+[HKEY_CURRENT_USER\Software\VS Revo Group\Revo Uninstaller\TrackCleaner\Browsers\EDGE]
+"Clear History of Visited Internet Web Pages"=dword:00000001
+"Delete Temporary Internet Files"=dword:00000001
+"Delete Cookies"=dword:00000000
+"Delete Download History"=dword:00000001
+"Delete Form History"=dword:00000001
+"Delete Session History"=dword:00000001
+
+[HKEY_CURRENT_USER\Software\VS Revo Group\Revo Uninstaller\TrackCleaner\Browsers\FF]
+"Clear History of Visited Internet Web Pages"=dword:00000001
+"Delete Temporary Internet Files"=dword:00000001
+"Delete Cookies"=dword:00000001
+"Delete Download History"=dword:00000001
+"Delete Form History"=dword:00000001
+"Delete Session History"=dword:00000001
+
+[HKEY_CURRENT_USER\Software\VS Revo Group\Revo Uninstaller\TrackCleaner\Browsers\IE]
+"Clear History of Visited Internet Web Pages"=dword:00000001
+"Delete Address Bar History"=dword:00000001
+"Delete Temporary Internet Files"=dword:00000001
+"Delete Cookies"=dword:00000001
+"Delete Index.dat files"=dword:00000001
+
+[HKEY_CURRENT_USER\Software\VS Revo Group\Revo Uninstaller\TrackCleaner\Browsers\Opera]
+"Clear History of Visited Internet Web Pages"=dword:00000001
+"Delete Download History"=dword:00000001
+"Delete Temporary Internet Files"=dword:00000001
+"Delete Cookies"=dword:00000001
+"Delete Session History"=dword:00000001
+
+[HKEY_CURRENT_USER\Software\VS Revo Group\Revo Uninstaller\TrackCleaner\MSOffice]
+"CWRDH"=dword:00000001
+"CERDH"=dword:00000001
+"CARDH"=dword:00000001
+"CPPRDH"=dword:00000001
+"CFPEDH"=dword:00000001
+
+[HKEY_CURRENT_USER\Software\VS Revo Group\Revo Uninstaller\TrackCleaner\Windows]
+"Clear Recent Documents History"=dword:00000001
+"Clear Start Menu Run History"=dword:00000001
+"Clear Find File History"=dword:00000001
+"Clear Printers, Computers and People Find History"=dword:00000001
+"Clear Paint Recent File History"=dword:00000001
+"Clear Wordpad Recent File History"=dword:00000001
+"Clear Regedit Last Opened Key History"=dword:00000001
+"Clear Common Dialog Open Save Recent History"=dword:00000001
+"Clear Common Dialog Last Visited Folder History"=dword:00000001
+"Delete Start Menu Click Logs"=dword:00000001
+"Empty Clipboard"=dword:00000001
+"Empty Recycle Bin"=dword:00000001
+"Delete Windows Temporary Files"=dword:00000001
+"Delete Memory Dump Files"=dword:00000001
+"Delete Chkdsk recovered file fragments"=dword:00000001
+"Delete Thumbnail Cache"=dword:00000001

install.bat

@@ -1,26 +1,25 @@
 @echo off
-:: ==========================================
-:: 自动化装机工具启动器
-:: ==========================================
+rem ==========================================
+rem Winit Helper launcher
+rem ==========================================
 
-:: 1. 强制切换到当前批处理文件所在的目录
-:: 这一步至关重要，防止以管理员身份运行时路径变成了 C:\Windows\System32
+rem Always run from the project directory.
 cd /d "%~dp0"
 
-:: 2. 检查管理员权限
+rem Relaunch as administrator when needed.
 if not "%1" == "am_admin" (
     rem you'd better keep the following line as it is.
-    powershell start -verb runas '%0' am_admin & exit /b
+    powershell.exe -NoProfile -Command "Start-Process -FilePath '%~f0' -ArgumentList 'am_admin' -Verb RunAs"
+    exit /b
 )
 
-:: ==========================================
-:: 3. 核心执行逻辑
-:: ==========================================
+rem ==========================================
+rem Run main script
+rem ==========================================
 
 echo Calling main.ps1...
 
-:: -NoProfile: 不加载用户配置文件，加快启动速度
-:: -ExecutionPolicy Bypass: 绕过默认的脚本执行策略限制
-:: -File: 指定要运行的脚本文件
+rem Remove Zone.Identifier from copied or downloaded project files.
+powershell.exe -NoProfile -ExecutionPolicy Bypass -Command "Get-ChildItem -LiteralPath '%~dp0' -Recurse -File -Include *.ps1,*.psm1,*.bat,*.cmd,*.json,*.yaml,*.yml,*.reg | Unblock-File -ErrorAction SilentlyContinue"
 
 powershell.exe -NoExit -NoProfile -ExecutionPolicy Bypass -File ".\bin\main.ps1"

lib/invoke-cmdexec.ps1

@@ -3,36 +3,36 @@ param(
     [string]$WorkDir = $null
 )
 
-# 1. 处理工作目录
+# 1. Resolve work directory.
 if ([string]::IsNullOrEmpty($WorkDir)) {
     $WorkDir = $PSScriptRoot
 } else {
-    # 如果 WorkDir 里包含变量（如 $env:APPDATA），展开它
+    # Expand variables in WorkDir, such as $env:APPDATA.
     $WorkDir = $ExecutionContext.InvokeCommand.ExpandString($WorkDir)
 }
 
-# 确保目录存在，否则命令会报错
+# Make sure the directory exists.
 if (-not (Test-Path $WorkDir)) {
     Write-Warning "`n[CMD] WARNING: The work dir does not exist, using ($WorkDir)"
     $WorkDir = $PSScriptRoot
 }
 
-# 2. 处理命令中的环境变量
+# 2. Expand variables in the command.
 $ProjectRoot = Split-Path $PSScriptRoot -Parent
-# === 替换 $PSScriptRoot 为实际的绝对路径 ===
-# 注意：要处理反斜杠转义问题，直接用字符串替换最安全
+# Replace $PSScriptRoot with the project root path.
+# Direct string replacement is the safest option for backslashes.
 if ($Command.Contains('$PSScriptRoot')) {
     $Command = $Command.Replace('$PSScriptRoot', $ProjectRoot)
 }
 
-# 这一步很关键，让你可以写 "echo $env:USERNAME"
+# This allows commands such as "echo $env:USERNAME".
 $Command = $ExecutionContext.InvokeCommand.ExpandString($Command)
 
 Write-Host "`n[CMD] Execute: $Command" -ForegroundColor Gray
 
-# 3. 启动进程
-# /c 表示执行完命令后关闭 cmd 窗口
-# /s 开启参数的一般处理（忽略第一个和最后一个引号，为了兼容复杂引号情况）
+# 3. Start cmd.exe.
+# /c closes cmd after the command completes.
+# /s enables cmd quote handling for complex command strings.
 $processOptions = @{
     FilePath = "cmd.exe"
     ArgumentList = "/s", "/c", "`"$Command`""
@@ -45,10 +45,10 @@ $processOptions = @{
 try {
     $proc = Start-Process @processOptions
     
-    # 4. 检查退出代码 (ExitCode)
+    # 4. Check exit code.
     if ($proc.ExitCode -ne 0) {
         Write-Error "`n[CMD] Failed to execute, exit code: $($proc.ExitCode)"
     }
 } catch {
     Write-Error "`n[CMD] Failed to start process: $_"
-}
+}

lib/invoke-filecopy.ps1

@@ -7,35 +7,33 @@ param(
 )
 
 try {
-    # 1. 路径预处理：展开环境变量 (例如把 $env:APPDATA 变成 C:\Users\...\AppData\Roaming)
+    # 1. Expand variables in paths.
     $ResolvedSource = $ExecutionContext.InvokeCommand.ExpandString($Source)
     $ResolvedDest   = $ExecutionContext.InvokeCommand.ExpandString($Destination)
 
-    # 2. 处理相对路径 (针对源文件)
-    # 如果源路径是相对路径 (./assets/...), 尝试将其转换为绝对路径
-    # 假设脚本是从项目根目录调用的
+    # 2. Resolve relative source paths from the project root.
     if (-not (Test-Path $ResolvedSource) -and (Test-Path "$PWD\$ResolvedSource")) {
         $ResolvedSource = Join-Path $PWD $ResolvedSource
     }
 
-    # 3. 再次检查源文件是否存在
+    # 3. Make sure the source file exists.
     if (-not (Test-Path $ResolvedSource -PathType Leaf)) {
         Write-Warning "`n[FileCopy] [Skip] File not found: $ResolvedSource"
-        return # 退出脚本
+        return
     }
 
-    # 4. 处理目标目录 (自动创建不存在的文件夹)
+    # 4. Create destination directory when needed.
     $DestDir = Split-Path -Path $ResolvedDest -Parent
     if (-not (Test-Path $DestDir)) {
         Write-Host "`n[FileCopy] Create dir: $DestDir" -ForegroundColor DarkGray
         New-Item -Path $DestDir -ItemType Directory -Force | Out-Null
     }
 
-    # 5. 执行复制 (Force = 覆盖)
+    # 5. Copy file. Force overwrites existing files.
     Copy-Item -Path $ResolvedSource -Destination $ResolvedDest -Force -ErrorAction Stop
     
     Write-Host "`n[FileCopy] Success: $ResolvedDest" -ForegroundColor Green
 
 } catch {
     Write-Error "`n[FileCopy] Fail: $_"
-}
+}

lib/invoke-regimport.ps1

@@ -4,17 +4,15 @@ param(
 )
 
 try {
-    # 1. 路径预处理
-    # 展开环境变量 (虽然 .reg 路径通常是固定的，但支持一下没坏处)
+    # 1. Expand variables in the path.
     $ResolvedPath = $ExecutionContext.InvokeCommand.ExpandString($Path)
 
-    # 2. 处理相对路径
-    # 如果路径是相对的 (./assets/...), 转换为绝对路径
+    # 2. Resolve relative paths from the project root.
     if (-not (Test-Path $ResolvedPath) -and (Test-Path "$PWD\$ResolvedPath")) {
         $ResolvedPath = Join-Path $PWD $ResolvedPath
     }
 
-    # 3. 检查文件是否存在
+    # 3. Make sure the registry file exists.
     if (-not (Test-Path $ResolvedPath)) {
         Write-Warning "`n[RegImport] [Skip] Cannot find: $ResolvedPath"
         return
@@ -22,8 +20,7 @@ try {
 
     Write-Host "`n[RegImport] Importing: $(Split-Path $ResolvedPath -Leaf)" -ForegroundColor Gray
 
-    # 4. 调用 reg.exe 导入
-    # 使用 Start-Process 以获取退出代码
+    # 4. Import with reg.exe and capture the exit code.
     $proc = Start-Process -FilePath "reg.exe" -ArgumentList "import", "`"$ResolvedPath`"" -Wait -PassThru -NoNewWindow
 
     if ($proc.ExitCode -eq 0) {
@@ -34,4 +31,4 @@ try {
 
 } catch {
     Write-Error "`n[RegImport] Failed to start process: $_"
-}
+}

manifests/Google.Chrome.yaml

@@ -0,0 +1,39 @@
+# yaml-language-server: $schema=https://aka.ms/winget-manifest.singleton.1.12.0.schema.json
+
+PackageIdentifier: Google.Chrome
+PackageVersion: 152.0.7977.83
+PackageLocale: zh-CN
+Publisher: Google LLC
+PackageName: Google Chrome
+License: 免费软件
+ShortDescription: 快速安全的网络浏览器，专为您而打造
+InstallerType: wix
+Scope: machine
+UpgradeBehavior: install
+Protocols:
+- http
+- https
+- mailto
+- mms
+- tel
+- webcal
+FileExtensions:
+- htm
+- html
+- pdf
+- shtml
+- svg
+- webp
+- xht
+- xhtml
+ElevationRequirement: elevatesSelf
+Installers:
+- Architecture: x64
+  InstallerUrl: https://dl.oranjee.org/winget-repo/manifests/g/Google/Chrome/152.0.7977.83/googlechromestandaloneenterprise64.msi
+  InstallerSha256: 1C555A95C69153EF2D6D6CF82670A4F2FAE6EB455CECF96CBD9BC43E5ED3B9E8
+  ProductCode: '{D73883EB-7167-37B2-A69C-06A4744F64D2}'
+  AppsAndFeaturesEntries:
+  - ProductCode: '{042C29DE-2EAE-34E1-A978-C2BE5AB65557}'
+    UpgradeCode: '{C1DFDF69-5945-32F2-A35E-EE94C99C7CF4}'
+ManifestType: singleton
+ManifestVersion: 1.12.0

manifests/RevoUninstaller.RevoUninstaller.yaml

@@ -0,0 +1,23 @@
+# yaml-language-server: $schema=https://aka.ms/winget-manifest.singleton.1.10.0.schema.json
+
+PackageIdentifier: RevoUninstaller.RevoUninstaller
+PackageVersion: 2.6.8
+PackageLocale: en-US
+InstallerType: inno
+Scope: machine
+InstallModes:
+- interactive
+- silent
+- silentWithProgress
+UpgradeBehavior: install
+ElevationRequirement: elevatesSelf
+Installers:
+- Architecture: x86
+  InstallerUrl: https://dl.oranjee.org/winget-repo/manifests/r/RevoUninstaller/RevoUninstaller/2.6.8/revosetup.exe
+  InstallerSha256: 8f90951459936a7e2d0eeb508297604bc3e2746d9f5e3646a3fcba1e35f4049b
+ManifestType: singleton
+ManifestVersion: 1.10.0
+License: Freeware
+PackageName: Revo Uninstaller
+Publisher: VS Revo Group, Ltd.
+ShortDescription: Revo Uninstaller helps you to uninstall software and remove unwanted programs easily.

selection.ini

@@ -0,0 +1,18 @@
+[Options]
+# 设为 0 表示已安装的软件不会进行设置
+# 设为 1 表示已安装的软件也会进行设置
+ForcePostInstall=0
+
+[Apps]
+7-Zip=1
+Google Chrome=1
+OpenOffice=1
+Microsoft Teams=1
+KeePassXC=1
+VeraCrypt=1
+File Shredder=1
+VLC=1
+Revo Uninstaller=1
+Adobe Acrobat Reader=0
+Browserautoms=1
+System Optimize=1